REWIRE SUPPORT
The following guide covers the steps required to use the FL Studio ReWire device with Live.
The guide assumes you have read and understood the general information and guidelines about using FL Studio as a ReWire client (see Client Mode).
Registering ensures Live will detect the device at startup and launch FL Studio as a ReWire client. If you have disabled the device earlier or you are not sure if it is registered, repeat the FL Studio ReWire device registration procedure.
Launch Live and start a new project (or open an existing one).
In the Live window, open an Audio track and select FL Studio from the popup window in the Audio From menu.
|
|
|
FL Studio is now setup to work properly as a ReWire device inside Live.
To test the setup, load an existing project in FL Studio or activate several steps in an existing channel and hit the play button in Live. You will hear FL Studio playing synchronized with Live.
To open the FL ReWire window, simply start FL Studio. When Live is running, FL will detect it as a ReWire master and will start in
ReWire client mode.